Runco CW-42i manual Setting high definition images to the suitable screen size, Information

OSD (On Screen Display) Controls

Information

■ RGB TYPE modes

One of these 6 modes must be selected in order to display the following signals correctly.

AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page 61.

STILL: To display VESA standard signals. (Use this mode for a still image from a computer.)

MOTION: The video signal (from a scan converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)

RESIZE1: When an 852 dot 480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB TYPE to RESIZE1.

RESIZE2: When an 848 dot 480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB TYPE to RESIZE2.

DTV: Set this mode when watching digital broadcasting (480P).

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu. Note that this also restores other settings to the factory defaults.

Setting high definition images to the suitable screen size

Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080.

Example Setting the “1080B” mode to “1035I”

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “INSTALL 1”, then press the MENU button. The “INSTALL 1” menu appears.

2.Use the and buttons to select “HD TYPE”.

3.To set the HD TYPE mode to “1080B”...

Use the and buttons to select “1080B”.

The mode switches as follows each time the or button is pressed:

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

■ HD TYPE modes

These 3 modes are not displayed with correct image signals automatically.

1080B	Standard digital broadcasts
1035I	Japanese “High Vision” signal format
1080A	Special Digital broadcasts (for example: DTC100)

1080B 1035I 1080A

INSTALL 1

OSD
BNC INPUT	:		COMP
D-SUB TYPE	:		RGB
RGB TYPE	:		AUTO
HD TYPE		:	1080B
INPUT SKIP		: OFF
FACTORY		: OFF
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

35