Runco CW-42i manual OSD On Screen Display Controls, Information, When “COMPUTER” is off

OSD (On Screen Display) Controls

Information

■ When “COMPUTER” is off

IMAGE OPTIONS ASPECT RATIO : VRTWIDE V SHIFT H SHIFT V-SIZEH-SIZE

COMPUTER : OFF

FINE PICTURE

PICTURE ADJ

0

0

0

0

0

0

SEL. ADJ. EXIT RETURN

When Auto Picture is off, the Fine Picture and the Picture ADJ. items area displayed so that you can adjust them.

■ Adjusting the COMPUTER

ON	The picture ADJ., Fine Picture and Position adjustments are made automatically. Not available for digital ZOOM.
OFF	The Picture ADJ., Fine Picture and Position adjustments are made manually.
* If FINE PICTURE will not adjust, set “Computer” to OFF and adjust manually.
■ Adjusting the position of the image
V SHIFT		Adjusts the vertical position of the image.
H SHIFT		Adjusts the horizontal position of the image.
V-SIZE		Adjusts the vertical size of the image. (Except for VRTWIDE mode)
H-SIZE		Adjusts the horizontal size of the image. (Except for VRTWIDE mode)
FINE PICTURE*		.... Adjusts for flickering.
PICTURE ADJ.*		..... Adjusts for striped patterns on the image.

*The Picture ADJ. and Fine Picture features are available only when the “Computer” is off.

*The COMPUTER, FINE PICTURE and PICTURE ADJ. are available only for RGB signals. But, these features are not available for moving pictures on VIDEO, COMP or RGB.

■ Restoring the factory defaults settings

Select “FACTORY” under the INSTALL 1 menu. Note that this also restores other settings to the factory defaults for Auto Picture.

31