Runco CW-42i manual Adjusting the Color to the Desired Level, Perform the following operations

OSD (On Screen Display) Controls

Adjusting the Color to the Desired Level

Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality. Example: Adjusting the “RED GAIN” of “9300K” color temperature.

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

Perform Steps 1-3 of KELVIN, then...

4.Press the MENU button. The “WHITE BALANCE” screen appears.

5.Use the and buttons to select “RED GAIN”.

WHITE BALANCE

KELVIN 6500K

RED GAIN GREEN GAIN BLUE GAIN RED OFFSET GREEN OFFSET BLUE OFFSET

RESET : OFF

60

61

60

50

50

50

SEL. ADJ. EXIT RETURN

6. Adjust the white balance using the and buttons.

RED GAIN

0

*If neither the and buttons is pressed within 5 seconds, the current setting is set and the previous screen reappears.

7.Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

■ Adjusting the white balance

R/G/B GAIN	White balance adjustment for signal level
R/G/B OFFSET	. .White balance adjustment for black level
RESET	Resets settings to the factory default
	values. Use and buttons to select
	“ON”, then press the MENU button.

■ Restoring the factory default settings

Select “RESET” under the WHITE BALANCE menu.

25