Runco CW-42i manual Disp. Mode, Auto Id, Perform Steps 1-2 of VIDEO WALL, then

OSD (On Screen Display) Controls

DISP. MODE

Select the screen mode from between two options (Splitting, Blanking).

Example: Setting “BLANK”

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the and buttons to select “DISP. MODE”.

4. Use the and buttons to select “BLANK”.

The mode switches as follows each time the or button is pressed: SPLIT BLANK

VIDEO WALL

DIVIDER		:	OFF
POSITION
DISP. MODE		:	SPLIT
AUTO ID
IMAGE OPT
P. ON DELAY		:	OFF
LUM SET LINK		:	OFF
REPEAT TIME		:	OFF
SEL.	ADJ.		EXIT RETURN

Information

■ DISP. MODE SETTINGS

SPLIT .......... Combines enlarged screens and creates

multiple

screens.

BLANK ....... Corrects misalignment of combined screen

portions and creates multiple screens.

AUTO ID

This feature automatically sets the ID numbers of multiple displays connected to each other. Example: Setting “ON”

Set the ID number for the No. 1 display on ID NUMBER menu.

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the and buttons to select “AUTO ID”.

4. Use the and buttons to select “ON”, then press the MENU button.

The mode switches as follows each time the or button is pressed: OFF ON

AUTO ID

AUTO ID		:	ON
1	2	1	2	3
4	3	8	9	4

Information

■AUTO ID settings

ON	Enables Audo ID function. In the case shown below, display 1
	will be set as ID 1, display 2 as ID 2, etc.

7	6	5
WIRED CABLE
CONNECTION TURN
ADJ.	EXIT EXIT

REMOTE IN

REMOTE

OUT

		REMOTE
No. 1	No. 2	OUT
No. 4	No. 3		REMOTE
				IN
Display 1
			REMOTE
No. 1	No. 2		OUT
No. 4	No. 3	REMOTE
		IN
Display 4

No. 1	No. 2	REMOTE
No. 4	No. 3	OUT
Display 2
No. 1	No. 2	REMOTE
No. 4	No. 3	IN

Display 3

OFF ..... Disables Auto ID function.

54