Setting the DEFAULT INPUT, Perform the following operations

OSD (On Screen Display) Controls

Information
■ PROGRAM TIMER settings
DATE		Set the day of the week (e.g. Sunday).
ON (hour, minutes) ....		Set the time at which the power will be turned on in the 24-hour format.
OFF (hour, minutes)...		Set the time at which the power will be turned off in the 24-hour format.
INPUT		Set the input mode that will be displayed when the timer is on.
FUNCTION	Set the PDP PROTECT function.

Align the cursor with the DATE ﬁeld that you wish to reset, then press the CLEAR button.

TIMER

DATE ON OFF INPUT FUNCTION

Align the cursor with the ﬁeld (ON/OFF/INPUT/FUNCTION) that you wish to reset, then press the CLEAR button.

Setting the DEFAULT INPUT

This function sets the input mode at the time the power is switched on.

Example: Setting “VIDEO2”

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then ...

1.Use the and buttons to select “INSTALL 3”, then press the MENU button. The “INSTALL 3” screen appears.

2.Use the and buttons to select “DEFAULT INPUT”.

3.To set the DEFAULT INPUT to “VIDEO2”... Use the and buttons to select “VIDEO2”.

An asterisk “*” means “every”. For example, “*FRI” means every Friday and “*” means everyday.

If any hyphen remains in the ON ﬁeld of OFF ﬁeld, the FUNCTION can not be set.

A hyphen “-” means last mode (the mode that was last selected at the time the power was switched off).

The mode switches as follows each time the or buttons is pressed: The available sources depend on the setting of “BNC INPUT”.

RGB: → LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←

→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←

COMP: → LAST↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←

→RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ←

4.Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.