Runco CW-42i Orbiter, Adjust the ORBITER function manually, ORBITER settings

OSD (On Screen Display) Controls

ORBITER
Use this to set the picture shift.					PDP PROTECT
Example: Setting ”ORBITER” to “AUTO1”
					LUM. SETTING		:	AUTO
Perform Steps 1-2 of PDP PROTECT, then...					ORBITER		:	OFF
					INVERSE		:	OFF
3. Use the		and	buttons to select “ORBITER”		IMAGE SWEEP		:	OFF
					SOFTEN		:	OFF
(relates to above).
					SEL.	ADJ.		EXIT RETURN
4. Use the		and	buttons to select “AUTO1”.
				button is pressed:
The mode switches as follows each time the or
	OFF AUTO1		AUTO2 MANUAL
Information
■ ORBITER settings
OFF		Orbiter mode does not function.
AUTO1............ The picture moves around the screen intermittently, making the picture smaller.
AUTO2 ........... The picture moves around the screen intermittently, making the picture bigger.
MANUAL ....... Use can adjust the orbiter function (H-Dot, V-Line and Time) manually. See the following explanation.

Adjust the ORBITER function manually.

Set the amount of shift and the time between movement.

Example: Setting so that the picture moves 2 dots horizontally and 3 lines vertically every 3 minutes. Perform Steps 1-3 of ORBITER, then...

4.Use the and buttons to select “MANUAL”, then press the MENU button. The “ORBITER” screen appears.

5.Adjust the items using the and buttons. The mode switches as follows each time the or button is pressed:

• H-DOT
	1 DOT	2 DOT	.....	19 DOT	20 DOT
• V-LINE
	1 LINE	2 LINE	.....	19 LINE		20 LINE
• TIME
	1 M 2 M 3 M		4 M	5 M

Information
■ ORBITER FUNCTION settings
H-DOT	Moves from 1 to 20 dots in the
	horizontal direction.
V-LINE	Moves from 1 to 20 dots in the
	vertical direction.
TIME	Interval of 1~5 minutes.

ORBITER

H-DOT	:	2 DOT
V-LINE	:	4 LINE
TIME	:	3 M

SEL. ADJ. EXIT RETURN

41