FARGO electronic HDP5000 manual Specifying TCP Event logging

RESTRICTED USE ONLYFargo Electronics, Inc.

Specifying TCP Event logging (continued)

Step Procedure

6Use a host program such as Telnet to receive these TCP logging messages (Note: Other programs such as HyperTerminal are also used to monitor TCP connections). See below.

•Telnet Client: You can use a Telnet client connected to the TCP port (log1 = 4010, log2 = 4011) rather than the default Telnet port (23).

•Telnet Session: If there is a Printer at IP address 192.37.23.155 (and you have configured log1 for TCP logging), then you could initiate a Telnet session from a DOS window of a PC by entering Telnet 192.37.23.155 4010.

•Log Messages: All system log messages would then be displayed in

that Telnet session window. (Note: This is a one way connection for logging only. Any input to the Printer on this connection is ignored.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-36