FARGO electronic HDP5000 manual Print

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
No iClass Encoder	You are trying to send	You are trying to send
(PC Error Message	encoding data, but the	encoding data, but the Printer
	Printer is not configured with	is not configured with this
No. 177)
	this Encoder type.	Encoder type.
No Mag Module	MAG encoding job sent to
(PC Error Message	Printer without a MAG
	encoder.
No. 31)
	You are trying to send
	encoding data, but the
	Printer is not configured with
	this Encoder type.
No MiFare Encoder	You are trying to send	To cancel, click on Cancel
(PC Error Message	encoding data, but the	Print.
	Printer is not configured with
No. 203)
	this Encoder type.
No Prox Encoder	You are trying to send	To cancel, click on Cancel
(PC Error Message	encoding data, but the	Print.
	Printer is not configured with
No. 32)
	this Encoder type.
No Ribbon	No Ribbon is installed in the	Install the correct Ribbon and
(PC Error Message	Printer.	press the Resume button
	OR	located o the Printer’s LCD
No. 25)
	The Ribbon RFID tag is bad.	display.
		To cancel the print, press the
		Cancel Print button from the
		Driver's display dialog and the
		Cancel button located on the
		Printer's LCD display.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-17