FARGO electronic HDP5000 manual Selecting the Lamination Type

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Lamination Type

Step Procedure

1Select one of the Lamination Type options, according to which type of Lamination media is currently installed. Two types of overlaminates are supported by the Driver: Film Lamination and PolyGuard Lamination.

Custom versions of each type are also available.

•Select the Clear Film Lamination option if the Thermal Transfer Film Overlaminate type is installed in the Lamination Module.

•Select the 0.6 PolyGuard Lamination option or 1.0 PolyGuard Lamination option for either patch thickness. (Note: These require different heat settings and Lamination speeds. Select the appropriate option according to the thickness of the PolyGuard material you are using.)

•Select Registered Film Lamination if you have a registered thermal transfer film.

•PolyGuard Alternating Patch and Holographic Film Lamination are options.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-85