FARGO electronic HDP5000 manual Technical Specification Ethernet Option, Function Requirement

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technical Specification - Ethernet Option

Here are the system requirements for Ethernet.

Caution: For safety purposes, Ethernet is not intended for a direct connection outside of the building.

Function	Requirement
Network	An IEEE 802.3 10/100 Base-T Ethernet network is required.
Printer	A Fargo Printer with the Ethernet option installed is required.
Printer	Since TCP/IP is used for the network communication, the Printer
Configuration	must be configured with an IP address and a subnet mask (before it
	can be seen on the network).
	An additional network setting for the Default Gateway can also be
	configured, which allows communication across the subnets.
Host Computer	A PC running Windows 2000, Windows XP, Windows 2003.
	(connected to the network) is required.
Host Printer	The host PC must have installed the correct Printer Driver with
Driver	Ethernet support. (Note: This Driver must be configured for printing
	to the IP address of the Printer.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-2