Briggs & Stratton 2900 PSI manual Product Specifications, Common Service Parts, Pressure Washer

Pressure Washer

Product Specifications

Max Outlet Pressure . . . . . . . . . . . . .2,900 PSI (200 BARS)

Max Flow Rate . . . . . . . . . . . . . . . .2.5 GPM (9.4 liters/min)

Water Supply Temperature . . . . . . . . . . .100ºF (38ºC) MAX

Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 cc

Spark Plug Gap . . . . . . . . . . . . . . . . . . .0.030 in. (0.76 mm)

Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . .3 Qt. (2.8 Liters)

Oil Capacity . . . . . . . . . . . . . . . . . . . .20 Ounces (0.6 Liters)

Common Service Parts

PumpSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6039

O-Ring Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . .6048

Water Inlet Screen . . . . . . . . . . . . . . . . . . . . . . . . .B2384GS

Air Cleaner . . . . . . . . . . . . . . . . . . . . . . .491588S or 5043D

Resistor Spark Plug . . . . . . . . . . . . . . . . . . . . . . . .491055S

Long Life Platinum Spark Plug . . . . . . . . . . . . . . . . . .5066D

Engine Oil Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . .100005

Fuel Stabilizer . . . . . . . . . . . . . . . . . . . . . .100002 or 5041D

Spark Arrester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .398067

Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power and Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).

Briggs & Stratton Power Products Group, LLC

900 N. Parkway

Jefferson, Wisconsin, 53549 U.S.A.

28 (800) 743-4115 BRIGGSandSTRATTON.COM