2. Select desired ProjectPro® nozzle: |
| • To apply detergent, apply project specific cleaners |
• For delicate rinse (lower pressure and higher flow), |
| to help break down stubborn dirt and grime on a |
for gentle cleaning of cars/trucks, boats, RV’s, patio |
| variety of surfaces, select black ProjectPro® |
furniture, lawn equipment, etc., select yellow |
| cleaning detergent nozzle. |
Delicate ProjectPro® nozzle. |
|
|
|
| |
|
|
|
|
|
|
•For general rinsing (medium pressure and medium flow), ideal for most all purpose cleaning such as home siding, brick patios, wood decks, driveways and sidewalks, garage floors, etc., select orange General ProjectPro® nozzle.
•For maximum rinsing (higher pressure and lower flow), for stubborn or hard to reach surface such as second story surfaces, paint removal, oil stains, rust removal or other stubborn substances (tar, gum, grease, wax, etc.), select red Max ProjectPro® nozzle.
3.Pull back on collar, insert new ProjectPro® nozzle and release collar. Tug on ProjectPro® nozzle to make sure it is securely in place.
Usage Tips
•For most effective cleaning, keep spray tip from 8 to 24 inches (20 to 61 cm) away from cleaning surface.
•If you get spray tip too close, especially using a high pressure spray tip, you may damage surface being cleaned.
•DO NOT get closer than 6 inches (15 cm) when cleaning tires.
Applying Detergent
CAUTION
Chemicals can cause bodily injury, and/or property damage.
•NEVER use caustic liquid with pressure washer.
•Use ONLY pressure washer safe detergents/soaps. Follow all manufacturers instructions.
To apply detergent, follow these steps:
1.Review use of ProjectPro® nozzles.
2.Prepare detergent solution as required by job.
3.Pour detergent solution into detergent tank labeled A or B.
NOTE: Each detergent tank holds two quarts.
4.Fill other detergent tank with a different prepared solution, as desired.
15
