FARGO electronic HDP5000 manual Troubleshooting with the LCD Error Message Table

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
Film: Wrong Material	The HDP Film is not installed	Verify the correct film is
(PC Error Message	properly or has been	installed in the film Cartridge.
	damaged.
No. 173)
Flipper Jam	A card is jammed in the card	Open the Printer's Flipping
(PC Error Message	flipping area of the Printer.	Module Cover.
Nos. 74 and 199)		Clear any cards in the Flipping
		Module by opening the
		Printers Cover and using the
		Forward and/or Back buttons
		located on the Printer’s Front
		Cover.
		Ensure that the Flipper Module
		can rotate freely. Close the
		Printer's Flipping Module
		Cover.
		Press the Resume button on
		the Printer’s Front Cover to
		continue printing.
		To cancel the print, press the
		Cancel Print button from the
		Driver's display dialog.
Head Loading	An unrecoverable error has	Reset the Printer and try
(PC Error Message	occurred during printing.	again. If this problem persists,
		call for technical assistance.
No. 111)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-9