Advanced Setup—Continued

IntelliVolume

You can set the input level for each input source. This is useful if some of your AV components are louder or qui- eter than others.

While this menu is shown onscreen, you can select each input source and set the levels while listening to and comparing them.

1

 

Press the [RECEIVER] button fol-

RECEIVER

lowed by the [SETUP] button.

 

 

The main menu appears onscreen.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “6. Input

ENTER

Setup,” and then press [ENTER].

 

The Input Setup menu appears.

ENTER

 

3

Use the INPUT SELECTOR but-

 

 

tons on the remote controller to

 

select the input source that you

 

want to set.

4

Use the Up and Down [ ]/[ ]

 

buttons to select

ENTER

“a. IntelliVolume.”

 

If a component is too loud compared to

 

your other components, use the Left

 

[ ] button to adjust the level. If it’s too

 

quiet, use the Right [ ] button.

The level can be set from –6 dB to +6 dB.

Setting Preferences

This section explains the items on the Preference menu.

1

 

Press the [RECEIVER] button fol-

RECEIVER

lowed by the [SETUP] button.

 

 

The main menu appears onscreen.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “7. Preference,”

ENTER

and then press [ENTER].

 

The Preference menu appears.

ENTER

 

3

Use the Up and Down [ ]/[

]

 

buttons to select the settings,

ENTER

and use the Left and Right [

]/

[ ] buttons to set them.

The settings are explained on page 72.

4

When you’ve finished, press the

 

 

[SETUP] button.

 

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

71

Page 71
Image 71
Onkyo TX-SR603/603E, TX-SR8360 instruction manual IntelliVolume, Setting Preferences, Then press Enter