Onkyo TX-SR603/603E Changing the Remote Controller’s ID, Press and hold down the Receiver

Advanced Setup—Continued

Changing the Remote Controller’s ID

If several Onkyo components are used in the same room, the remote controller’s control codes may overlap with those of another component. To differentiate the remote controller’s control codes, you can change its ID to another number.

Notes:

If you change the remote controller’s ID, be sure to set the same ID on both the remote controller and AV receiver (see “e. Remote ID” on page 72). The default ID for both is 1.

1

Number

buttons

1

1	Press and hold down the [RECEIVER]
	button, and then press the TV [INPUT]
	button.
2	Use the number buttons to enter a remote
	control ID.

You can enter 1, 2, or 3.

73