Onkyo TX-SR8360, TX-SR603/603E instruction manual Using Zone

Zone 2—Continued

Using Zone 2

Here you can turn on Zone 2, select an input source, and adjust the volume.

1	4
2
	1–4

To set Zone 2 to the same source as the main room, press the [ZONE 2] button repeatedly to display

“Zone 2 Sel: Source.”

3	To adjust the Zone 2 volume with
ZONE 2	the remote controller, press the
	[ZONE 2] button, and then use
	the [LEVEL–] and [LEVEL+] but-
	tons.
LEVEL- LEVEL+	To do this on the AV receiver,
	press the ZONE 2 LEVEL [ ]/[ ]
	buttons.
	If the Zone 2 receiver/integrated amp is
	connected to the AV receiver’s ZONE 2
	LINE OUT L/R jacks, use the volume
	control on the receiver/integrated amp.

3

Note:

To control Zone 2 with the remote controller, you must press the [ZONE 2] button first.

4

ZONE 2

STANDBY

To turn off Zone 2 with the remote controller, press the [ZONE 2] button followed by the [STANDBY] button.

To do this from the AV receiver, press the [OFF] button.

1	ZONE 2	Point the remote controller at the
		AV receiver and press the

[ZONE 2] button followed by the [ON] button.

ON	This turns on Zone 2 and the AV
	receiver’s 12V TRIGGER OUT.

2		To select the Zone 2 input source
	ZONE 2	with the remote controller, press
		the [ZONE 2] button followed by
		an input selector button.
		If you select AM or FM, you can use
		the remote controller’s [TUNER] but-
		ton to select the band.
		To perform steps 1 and 2 on the
		AV receiver, press the [ZONE 2]
		button followed by an input
		selector button within eight sec-
		onds.
		The name of the selected Zone 2 source
		appears on the display.

Notes:

•If the Sleep function has been set, the Zone 2 compo- nent will turn off along with the AV receiver when the specified sleep time expires. To use the Sleep function with Zone 2 only, set the Sleep function and then set the AV receiver to Standby.

•Only analog input sources are output by the ZONE 2 LINE OUT and ZONE 2 SPEAKERS terminals. Dig- ital input sources are not output. If no sound is heard when an input source is selected, check if it’s con- nected to an analog input.

•While Zone 2 is being used, listening modes that need surround back speakers (i.e., Dolby Digital EX and DTS-ES) are unavailable.

•While Zone 2 is on, functions will not work.

•You can’t select different radio stations for Zone 2 and the main room. For example, if you have an FM sta- tion for the main room, that station will also be used in Zone 2.

76