Onkyo TX-SR603/603E, TX-SR8360 Buttons to select 1. Speaker, Config, and then press Enter

First Time Setup—Continued

2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Speaker
ENTER	Config,” and then press [ENTER].
	The Speaker Config menu appears.

ENTER

3	Use the Up and Down [ ]/[ ]
	buttons to select “a. Subwoofer,”

and then use the Left and Right

ENTER

[]/[ ] buttons to select:

Yes: Select if a subwoofer is con- nected.

No: Select if no subwoofer is con- nected.

4	Use the Up and Down [		]/[	]
	buttons to select “b. Front,” and
	then use the Left and Right [			]/
	ENTER	] buttons to select:
	[
		Small: Select if the front speakers are
		small.
	Large: Select if the front speakers are
		large.
	Note:
	If the Subwoofer setting in step 3 is set
	to No, this setting is fixed at Large.
5	Use the Up and Down [		]/[	]
	buttons to select “c. Center,” and
	then use the Left and Right [			]/
	ENTER
	[	] buttons to select:

Small: Select if the center speaker is small.

Large: Select if the center speaker is large.

None: Select if no center speaker is connected.

Note:

If the Front setting in step 4 is set to Small, the Large option cannot be selected.

6	Use the Up and Down [ ]/[ ]
	buttons to select “d. Surround,”

and then use the Left and Right

ENTER

[]/[ ] buttons to select:

Small: Select if the surround left and right speakers are small.

Large: Select if the surround left and right speakers are large.

None: Select if no surround left and right speakers are connected.

Note:

If the Front setting in step 4 is set to Small, the Large option cannot be selected.

7	Use the Up and Down [ ]/[ ]
	buttons to select “e. SurrBack,”

and then use the Left and Right

ENTER

[]/[ ] buttons to select:

Small: Select if the surround back left and right speakers are small.

Large: Select if the surround back

speakers are large.

None: Select if no surround back speakers are connected.

Notes:

•If the Surround setting in step 6 is set to None, this setting cannot be selected.

•If the Surround setting in step 6 is set to Small, this setting cannot be set to Large.

8		Use the Up and Down [ ]/[ ]
		buttons to select “f. SurrBack
	ENTER	ch,” and then use the Left and
		Right [ ]/[ ] buttons to select:

1ch: Select if one surround back

speaker is connected.

2ch: Select if two (left and right) surround back speakers are connected.

Note:

If the Surround Back Setting in step 7 is set to None, this setting cannot be selected.

Continue with step 9 on page 48.

47