Onkyo TX-SR603/603E, TX-SR8360 instruction manual TV Format Setup not North American models

First Time Setup—Continued

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.
	The main menu appears onscreen.

TV Format Setup (not North American models)

Here you can specify the TV format used in your area.

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.
	The main menu appears onscreen.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “0. Initial Setup,” and then press [ENTER].

The Initial Setup menu appears.

(Menus vary depending on country.)

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “0. Initial Setup,” and then press [ENTER].

The Initial Setup menu appears.

3	Use the Up and Down [ ]/[ ]
	buttons to select “f. Sp Imped-

ance,” and then use the Left and

ENTER

Right []/[ ] buttons to select:

4 ohms: Select if the impedance of any connected speaker is 4 ohms or more, but less than 6 ohms.

6 ohms: Select if the impedances of all connected speakers are between 6 and 16 ohms.

4	Press the [SETUP] button.
	The setup menu closes.

(Menus vary depending on country.)

3	Use the Up and Down [ ]/[ ]
	buttons to select “h. TV Format,”

and then use the Left and Right

ENTER

[]/[ ] buttons to select:

Auto: Conforms with the video input signal.

PAL: Select if the TV system in your area is PAL.

NTSC: Select if the TV system in your area is NTSC.

4	Press the [SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

45