Handset Settings
20
Ringer setup
Ringer volume
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Ringer Setup”, then press
{>}.
4Select “Ringer Volume”, then press
{>}.
5Press {e} or {v} repeatedly to select
the desired volume.
6Press {>}.
7Press {ih}.
Note:
LThe handset will ring for intercom calls
and when paged even if the ringer is
turned off.
Changing ringtones
You can change the ringtone used by the
handset.
“Ext. Ringtone”: Selects the ringtone for
outside calls.
“Int. Ringtone”: Selects the ringtone for
intercom calls.
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Ringer Setup”, then press
{>}.
4Select the desired item, then press {>}.
5Select the desired ringtone, then press
{>}.
6Press {ih}.
Night mode
Night mode allows you to select a block of
time during which the handset will not ring
for outside calls. This feature is useful for
times when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set independently for the handset and the
base unit (page 25).
Set the date and time beforehand (page 12).
Setting the start and end time for night
mode
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Ringer Setup”, then press
{>}.
4Select “Night Mode”, then press {>}.
5Select “Start/End”, then press {>}.
6Enter the desired hour and minute you
wish to start this feature by selecting 2
digits for each.
LIf you use 12-hour time entry, select
“AM” or “PM” by pressing {*}
repeatedly before entering the time.
7Enter the desired hour and minute you
wish to end this feature by selecting 2
digits for each.
LIf you use 12-hour time entry, select
“AM” or “PM” by pressing {*}
repeatedly before entering the time.
8Press {j/OK}.
9Press {ih}.
Turning night mode on/off
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Ringer Setup”, then press
{>}.
TG1805AL(e-e).book Page 20 Thursday, March 17, 2005 9:37 AM