Base Unit Settings
28
consult your nearest Panasonic service
centre.
1Press {j/OK}.
2Select “Base Unit Setup”, then
press {>}.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it.
4Select “Other Options”, then press
{>}.
5Select “Base Unit PIN”, then press
{>}.
6Enter the new 4-digit base unit PIN, then
press {j/OK}.
7Press {ih}.
Resetting the base unit to its
default settings
1Press {j/OK}.
2Select “Base Unit Setup”, then
press {>}.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page
27).
4Select “Other Options”, then press
{>}.
5Select “Reset Base”, then press {>}.
6Select “Yes”, then press {>}.
7Press {ih}.
Note:
LThe following items will be deleted or reset
to their default settings:
– Settings listed on page 24
– Caller list
LThe following items will be retained:
– Date and time
– Repeater mode
TG1805AL(e-e).book Page 28 Thursday, March 17, 2005 9:37 AM