Multi-unit Operation
33
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page
27).
4Select “Other Options”, then press
{>}.
5Select “Repeater Mode”, then press
{>}.
6Select “On” or “Off”, then press {>}.
7Press {ih}.
Note:
LAfter turning repeater mode on/off, you
will not be able to make or receive calls for
a few moments.
Intercom between
handsets
Intercom calls can be made between
handsets in the same radio cell, but not
between handsets in different radio cells.
Example: When handset 1 calls handset 2
1Handset 1:
Press {INT} and {2} (desired handset
number).
2Handset 2:
Press {C} to answer.
3When finished talking, press {ih}.
Transferring calls
between handsets
Outside calls can be transferred between 2
handsets in the same radio cell.
Example: When handset 1 transfers a call
to handset 2
1Handset 1:
During an outside call, press {INT} and
{2} (desired handset number).
LThe outside call will be put on hold.
LIf there is no answer, press {INT} to
return to the outside call.
2Handset 2:
Press {C} to answer the page.
LHandset 2 can talk with handset 1.
3Handset 1:
To complete the call transfer, press
{ih}.
Transferring a call without speaking to
the other handset user
1During an outside call, press {INT}, then
press the desired handset number.
LThe other handset rings if it is within
range of the base unit and turned on.
2Press {ih}.
LThe outside call rings at the other
handset.
Note:
Lk flashes to indicate the outside call is on
hold.
LIf the other handset user does not answer
the call within 1 minute, the call will ring at
your handset again.
TG1805AL(e-e).book Page 33 Thursday, March 17, 2005 9:37 AM