Sharp AR-350 System settings default settings, Print density level, A4/letter auto select

System settings (default settings)

These programs are used to adjust the settings of various printer functions from the factory default settings or to cancel the settings.

In "Default Settings", the following programs can be set.

●Print density level

●Disable notice page printing

●Disable test page printing

●A4/letter auto select

Print density level

This program is used to adjust the lightness or darkness of documents in the print mode.The density level is adjusted in five levels.

[When using the operation panel on the main unit:]

The print density level can be selected from the following items.

NORMAL, LIGHTEST, LIGHTER, DARKER, DARKEST

[When using the operation panel with touch panel:]

Among the displayed numbers, a smaller value indicates lighter density and a larger value indicates a darker density.

KEY OPERATOR PROGRAMS

A4/letter auto select

If this program is set, when printing onto 8-1/2" x 11" size paper is instructed to the printer without 8- 1/2" x 11" size paper installed, A4 size paper will be automatically selected in place of 8-1/2" x 11" paper.

❇8-1/2" x 11" paper cannot be automatically selected in place of A4.

NOTE

When 8-1/2" x 11" size is specified in a document attached to an E-mail that has been transmitted from a foreign country and A4 size paper is not installed in the printer, printing cannot be executed immediately. If this program is set, printing will be executed without additional operation.

Disable notice page printing	6
This program is used to disable notice page printing.
For notice page printing, see "Notice page printing"
(appendix).
Disable test page printing
This program is used to disable test page printing.
If this program is set, printer test page printing in
custom settings (page xxxx) cannot be executed.

6-11