9Remove the staple box.
10Raise the lever at the end of the staple box.
If the top staple is bent, be sure to cut it out. If bent staples remain, a staple jam may occur.
11Return the lever to its original position.
SADDLE STITCH FINISHER
12Insert the staple box.
Push the staple box until it clicks into place.
13Push back the stapler section.
14Close the front cover.
NOTE
Execute test printing in the staple sort mode to ensure that stapling is performed properly.
■Punch scrap disposal
Pull the knob and slide the saddle stitch
1finisher away from the main unit.
Pull out the punch scrap collecting
2container and remove the punch scraps.
Be careful not to scatter punch scraps. Put them in a plastic bag or the like for disposal.
5
Return the punch scrap collecting
3container to its original position.
Push the saddle stitch finisher to the main
4unit.
