FINISHER
Using the finisher functions
■Using the stapling function from the printer feature
When using the stapling function, select “Properties” on the printer driver setting screen, open the “Main” tab shown in the right illustration, and then select “Left”, “Right” or “Top” at “Binding Edge” and “1 Staple” or “2 Staples” at “Staple”.
NOTES
●For the settings above, installation of peripheral units must have been set properly in the properties of the printer driver (see NOTE on page
●Depending on the combination of paper selection and functions, the desired setting may not be possible. For details of setting items, see the printer driver help. The details of the functions are described.
The illustration below shows the screen for a PCL printer driver in the Windows 98 environment.
■Using the finisher functions in the copy mode
If you touch the [OUTPUT] key on the copy mode basic screen, a screen for selecting the sort/group/staple functions and selecting an exit tray will appear.
OUTPUT
SORT
STAPLE
SORT
GROUP
|
| 5 | |
OK |
| ||
|
|
| |
|
|
|
|
TOP TRAY
OFFSET
TRAY
OFFSET
[GROUP] key (See page xx.)
If this function is selected, all copies of the same original will be grouped.
[STAPLE SORT] key (See page xx.)
If this function is selected, sorted copies will be stapled and delivered to the offset tray. (not offset stacked)
[SORT] key (See page xx.)
If this function is selected, each set of copies will be sequentially delivered.
Icon display
The icon of the selected function (sort, staple sort or group) is displayed.
[OFFSET] key (See page xx.)
If this function is selected (checked), the offset function will be enabled. If the check mark is cleared, the offset function will be disabled. (If the staple sort function is selected, the check mark of the offset function will be automatically cleared.)
[OFFSET TRAY] key (See page xx.)
If the offset tray is selected, printed sheets will be delivered to the offset tray. (If the staple sort function is selected, the offset tray will be automatically selected.)
[TOPTRAY] key
If the top tray is selected, printed sheets will be delivered to the top tray.
[OK] key
Press to close this screen and to return to the basic screen.
●If a function is selected, the corresponding key will be highlighted.
