Sharp AR_M280, AR-350 operation manual Loading paper in the multi purpose drawer, Specifications

LOADING PAPER

Loading paper in the multi purpose drawer

The method of loading paper for the multi purpose drawer is the same for paper tray 1 in the main unit. Load paper referring to steps 1 to 5 on page xxxx.

The following items, however, are different from paper tray 1.

●Ordinary paper of standard sizes from 11" x 17" to 5-1/2" x 8-1/2"R (A3 to A5R) can be set.

●Also certain types of special paper can be set.

For special papers that can be set, see “Paper available in the bypass tray/multi purpose drawer” on page xxxx. When setting envelopes or postcards in the multi purpose drawer, read thoroughly the description of “Setting envelopes or postcards” below.

■How to change the paper size

If the paper size or paper type is changed when paper is set in the tray, the tray settings in the custom settings must be changed. Be sure to change the setting referring to “Method of setting paper size and type” on page xxxx.

■Setting envelopes or postcards

When setting envelopes or postcards in the multi purpose drawer, set them in the orientation shown below.

Notes common to setting of envelopes and postcards

●Do not print onto two sides. A paper misfeed or improper printing may occur.

●Be sure to write addresses after printing. Do not use envelopes or postcards on which printing has been performed with a thermal transfer printer or an ink jet printer. Paper on which printing has been performed with a thermal transfer printer with a ribbon cassette, particularly, may cause printed characters to come off or may cause smudges on printouts.

Example of setting postcards

Be sure to set the postcards face down and the upper part located in the left.

Note on setting postcards

●Smooth out curled postcards before printing. Crumpling, misfeeds or improper printing may occur.

Example of setting envelopes

For envelopes, only the address side can be printed on. Be sure to set envelopes with the address side down and the upper part located in the left.

Notes on setting of envelopes

●For envelope sizes that can be used, see “Paper available in the bypass tray/multi purpose drawer” on page xxxx.

●Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self- adhesive patches or synthetic materials. A paper misfeed, improper fixing or failure may occur.

Specifications

Name	Multi purpose drawer
Paper size	Max. 11" x 17" (A3), min. 5-1/2" x 8-1/2"R (A5R)
Paper capacity	500 sheets (20 lbs. (80 g/m2)) of paper, 100 envelopes, 100 postcards,
	100 sheets of transparency film
Dimensions	23-1/32" (W) x 20-7/8" (D) x 4-1/2" (H) (585 mm (W) x 530 mm (D) x 114 mm (H))
Weight	Approximately xxxx kg

Specifications are subject to change for improvement without notice.

1-22