Sharp AR-350 5-13, Remove the paper from the stapler compiler, Insert the staple box, Finisher

FINISHER

10

11

Remove the paper from the stapler compiler.

Raise the lever at the end of the staple box.

If the top staple is bent, be sure to cut it out. If bent staples remain, a staple jam may occur.

12

13

Return the lever to its original position.

5

Insert the staple box.

Push the staple box until it clicks into place.

14

15

Unlock the staple unit lever and return the staple unit to face down.

Close the front cover.

NOTE

Execute test printing in the staple sort mode to ensure that stapling is performed properly.

5-13