Sharp AR-350, AR_M280 operation manual Troubleshooting concerning the finisher, Not operate

FINISHER

Troubleshooting (concerning the finisher)

Check the list below before contacting the SHARP Service Center.

Problem		Solution
Stapling position is	Stapling position not set properly in the		Check the stapling position setting. (See page xx.)
not correct.	stapling setting?
The finisher does	The finisher is open or the top cover, front		Close all covers. (See pages xx and xx.)
not operate.	cover or paper guide of the finisher open?
	Message indicating need to remove paper		Remove all paper from the stapler compiler following
	from the stapler compiler displayed?		the procedure described in step 1 on page xx.
Stapling cannot be	Message requesting check for the staple		Remove jammed staples. (See page xx.)
performed.	unit displayed?
	Message requesting adding staples		Replace the staple cartridge. (See page xx.)
	displayed?
	Different size paper included?		Stapling cannot be performed onto different size
			paper.
	Paper heavily curled?		Paper may be curled heavily depending on the paper
			type and quality. Remove paper from the paper tray
			or the bypass tray, turn it upside down, and load it
			again.

5

5-15