Sharp AR-350, AR_M280 operation manual Key Operator Programs, Restore Configuration

KEY OPERATOR PROGRAMS

AUDITING MODE (OFF*)

PRINT PER ACCOUNT

RESET ACCOUNT

ACCOUNT NUMBER CONTROL

NO PRINT IF ACC'T # INVALID (NO*)

DISABLE DUPLEX UNIT (NO*)

DISABLE STAPLER UNIT (NO*)

DISABLE PAPER DESK DRAWERS (NO*)

DISABLE FINISHER (NO*)

DISABLE MAIL-BIN STACKER (NO*)

SADDLE STITCH ADJUST

[OK]

[BACK/C]	PRINT PER ACCOUNT DISPLAY (ON*)
	PRINT PER ACCOUNT PRINT

	ENTER NEW ACCOUNT NUMBER (5 digits)
[OK]	DELETE NEW ACCOUNT NUMBER
	CHANGE NEW ACCOUNT NUMBER
[BACK/C]
	PRINT NEW ACCOUNT NUMBER
[OK]
[BACK/C]	PAPER SIZE A4 (0.0 mm*)
	PAPER SIZE B4 (0.0 mm*)
	PAPER SIZE A4R (0.0 mm*)
	PAPER SIZE LEDGER (0.0 mm*)
	PAPER SIZE LETTER-R (0.0 mm*)
[OK]
	PRINT DENSITY LEVEL (NORMAL*)
[BACK/C]	DISABLE NOTICE PAGE PRINTING (YES*)
	DISABLE TEST PAGE PRINTING (YES*)
	A4/LT AUTO SELECT (OFF*)
[OK]
	HEXADECIMAL DUMP MODE (OFF*)
[BACK/C]	PDL FOR PARALLEL PORT (AUTO*)
	PDL FOR NETWORK PORT (AUTO*)
	I/O TIMEOUT (20 sec.*)
	PORT SWITCHING (PER JOB*)

6

DEFAULT SETTINGS

INTERFACE SETTINGS

NETWORK SETTINGS

INITIALIZE/STORE SETTINGS

PRODUCT KEY

[OK]		[BACK/C]
[BACK/C]	IP ADDRESS SETTING		IP ADDRESS SETTING (000.000.000.000*)
	ENABLE TCP/IP (YES*)	[OK]	IP SUBNET MASK (000.000.000.000*)
	ENABLE NetWare (YES*)		IP GATEWAY (000.000.000.000*)

ENABLE EtherTalk (YES*)

ENABLE NetBEUI (YES*)

RESET THE NIC

[OK]

RESTORE FACTORY DEFAULTS [BACK/C] STORE CURRENT CONFIGURATION

RESTORE CONFIGURATION

[OK]	PS3 EXPANSION KIT INPUT PRODUCT KEY
[BACK/C]	NETWORK SCANNER EXPANSTION KIT INPUT PRODUCT KEY

6-5