Sharp AR_M280, AR-350 5-12, Staple cartridge replacement and staple jam removal, 3 box, Finisher

FINISHER

Staple cartridge replacement and staple jam removal

When the staple cartridge is empty or staples become jammed, a message will appear in the message display of the operation panel.

Follow the procedure below to replace the staple cartridge or remove jammed staples.

1 Open the front cover.

2 Turn the staple unit to face up.

Hold the release lever to remove the staple

3 box.

Check the remaining staples in the staple box. If no staple remains, replace the staple cartridge (steps 4 to 9). If sufficient staples remain, remove the jammed staples (steps

10 to 14).

4 Remove the empty staple cartridge.

NOTES

●Do not remove the fixing tape before inserting the staple cartridge.

●Ensure that the staples are securely fixed. Push the cartridge until it clicks in place.

Remove the tape that fixes the staples by

6 pulling it straight.

7 Insert the staple box.

Push the staple box until

it clicks into place.

Unlock the staple unit lever and return the

8 staple unit to face down.

Insert a new staple cartridge into the

5 staple box aligning the arrow of the staple

cartridge with that of the staple box.

9 Close the front cover.

NOTE

Execute test printing in the staple sort mode to ensure that stapling is performed properly.

Staple cartridge replacement is now complete. Following steps 10 to 14 are the procedure for staple jam removal. These steps are not needed for staple cartridge replacement.

5-12