Sharp AR_M280, AR-350 Finisher functions, Sort mode Group mode, Offset mode, Staple sort mode

FINISHER

Finisher functions

■ Sort mode ■ Group mode

Each set will be sequentially printed and delivered.

All copies of the same page will be grouped.

Original Printouts Original Printouts

■Offset mode

Offset mode	Non-offset mode	The offset tray moves from side to side so that each
		set is offset from the previous set and each set can
		be easily taken out. (The offset function operates
		only in the offset tray.)
		When the staple sort function is selected, the offset
		function will not operate.

■Staple sort mode

Collated sets of printouts are stapled and delivered to the offset tray.The stapling positions, orientation, paper size for stapling, and stapling capacity are shown below.

Stapling positions	Portrait orientation		Landscape orientation
Rear corner of		Available paper sizes: 8-1/2"		Available paper sizes: 8-1/2" x
printouts		x 11", A4 and B5		11", A4 and B5
		Stapling capacity: Up to 30		Stapling capacity: Up to 30
		sheets for any available sizes		sheets for any available sizes
Center left two		Same as above		Two-position stapling
positions of printouts				cannot be made for
				landscape orientation.
Front corner of		Same as above		Available paper sizes: 8-1/2" x
printouts				11", A4 and B5
				Stapling capacity: Up to 30
				sheets for any available sizes

5-10