Sharp AR_M280, AR-350 Key Operator Programs, The display in shows the factory default setting

KEY OPERATOR PROGRAMS

Details of classification of setting items (hierarchical structure) and supplementary explanationofkeyoperation(whenusingtheoperationpanelonthemainunit)

The setting operation of key operator programs are classified (hierarchical structure) as shown below. If you complete a program or if you press the [BACK/C] key to cancel a program, the display one level higher will appear. [C] displayed in messages indicates the [BACK/C] key.

If you press the [] or [] key, the display will move to another item on the same level. If a mistake is made in selection of a number, press the [BACK/C] key to correct it. If you press the [OK] key to complete program setting, “*” will be added to the message.

The display in ( ) shows the factory default setting.

	[OK]		[OK]
Key operator code entry		AUDITOR SETTINGS
	[BACK/C]		[BACK/C]

	[OK]
ENERGY SAVE	[BACK/C]		AUTO POWER SHUT-OFF TIMER (30 min.*)
			AUTO POWER SHUT-OFF (ENABLE*)
			PREHEAT MODE (15 min.*)
			TONER SAVE (OFF*)
		[OK]
OPERATION PANEL SETTINGS		[BACK/C]	AUTO CLEAR SETTING (60 sec.*)
			MESSAGE DISPLAY TIME (6 sec.*)
			LANGUAGE SETTING (ENGLISH*)

[OK]

DEVICE SETTINGS

[BACK/C]

PRINT KEY OPERATOR PROGRAM LIST

[OK]

KEY OPERATOR CODE CHANGE SET CODE [BACK/C]

SYSTEM SETTINGS

[OK]

[BACK/C]

NOTE

To exit the key operator program, press the [MENU] key on the operation panel.

6-4