LOADING PAPER
When paper runs out during printing, a message indicating that paper runs out will appear.
Follow the procedure below to load paper.
NOTES
●Do not use curled or folded paper. Doing so may cause a misfeed.
●Use SHARP standard paper for paper tray 1. (See page xxxx.)
●When you change the paper type in paper tray 1, set the paper type referring to “Method of setting paper size and type” (page xxxx).
●Do not place a heavy object or press down hard on a tray when the tray is pulled out.
Loading paper in paper tray 1
1 Pull out paper tray 1.
Gently pull the tray out until it stops.
3
4
Gently push paper tray 1.
Push the tray firmly all the way into the machine.
Set the paper type.
If you change the paper type, be sure to set the paper type referring to “Method of setting paper size and type” (page xxxx).
2 Load paper into the tray.
Do not load paper above the maximum height line (approximately 500 sheets of 20 lbs. (80 g/m2) paper).
Loading of paper in paper tray 1 is now
5 complete.
Changing the paper size in paper tray 1
For paper tray 1,
1 Pull out paper tray 1.
If paper remains in the tray, remove it.
Adjust the guide plates A and B in the
2 tray to the length and width of the paper.
The guide plates A and B are slidable. Adjust them to the paper size to be loaded while squeezing their lock levers.
4
5
Gently push paper tray 1.
Push the tray firmly all the way into the machine.
Set the paper size.
Be sure to set the paper size and paper type referring to “Method of setting paper size and type” (page xxxx).
If this operation is not performed after the paper size has been changed, printing will be made to paper of a size other than the specified size and a paper misfeed may occur.
3 | Load paper into the tray. | 6 | Changing of paper size in paper tray 1 is |
| now complete. | ||
|
|
|
