Preparation
11
LThis unit is not designed to be used with
rotary (pulse dialling) services.
Battery installation
1Insert the batteries negative (T)
terminal first.
2Close the handset cover.
Note:
LUse only rechargeable batteries (page 4).
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
Note:
LIt is normal for the handset to feel warm
during charging.
LIt takes 7 hours to fully charge the
batteries, however, you can use the
handset before the batteries are fully
charged.
LClean the charge contacts (page 9) of the
handset and base unit with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
Battery strength
Note:
LWhen 7 flashes, recharge the handset
batteries. 7 will continue to flash until
the batteries have been charged for at
least 15 minutes.
Battery icon Battery strength
5High
6Medium
7Low
When flashing: Needs
to be charged.
TG1805AL(e-e).book Page 11 Thursday, March 17, 2005 9:37 AM