Onkyo TX-SR603/603E, TX-SR8360 instruction manual Equalizer Setting

First Time Setup—Continued

Equalizer Setting

This setting is set automatically by the Automatic Speaker Setup function (see page 39).

Here you can adjust the EQ of individual speakers. To set the volume of individual speakers see page 50.

1

2

2–6

1, 7

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.
	The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “5. Equalizer
ENTER	Settings,” and then press
	[ENTER].
	The Equalizer Settings menu appears.
ENTER

3	Use the Left and Right [	]/[ ]
	buttons to select:
	Off: Tone off, response flat.
	ENTER
	Auto: The tone for each speaker is
	set automatically by the
	Automatic Speaker Setup
	function.
	Manual: You can adjust the EQ of each
	speaker manually.
	If you select Manual, continue with this
	procedure. If you select Off or Auto, go
	to step 7.
4	Use the Down [ ] button to
	select “Channel,” and then use
	the Left and Right [ ]/[	] but-
	ENTER

tons to select a speaker.

ENTER

5	Use the Up and Down [ ]/[ ]
	buttons to select a frequency,
	and then use the Left and Right
	ENTER
	[ ]/[ ] buttons to adjust the
	level at that frequency.
	The volume at each frequency can be
	adjusted from –6 to +6 dB in 1 dB
	steps.
	Tip: Low frequencies (e.g., 80 Hz)
	affect bass sounds; high frequencies
	(e.g., 8 kHz) affect treble sounds.
6	Use the Up [	] button to select
	“Channel,” and then use the Left
	and Right [	]/[ ] buttons to

select another speaker.

Repeat steps 5 and 6 for each speaker.

7	Press the [SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

51