Installation of the appliance
•Choose an even surface with enough space for the ventilation of the appliance.
•Keep a distance at least 7.5 cm between the appliance and the adjacent walls. Make sure that the door of the microwave oven can be easily opened.
•Make sure that the power plug is easily acces- sible and can be reached and disconnected in emergencies or dangerous situations.
•Keep a gap at least 30 cm free above the microwave.
•Do not remove the feet underneath the micorwave.
•Do not block air supply and exhaust openings. Otherwise the appliance may be damaged.
•Install the appliance as far away as possible from radios and televisions. The operation of the microwave oven can cause malfunctions of radio and television reception.
•Connect the appliance to a standard house- hold wall socket. Make sure that the voltage and frequency ratings correspond to the details stated on the rated power label.
Important! Do not install the microwave above a cooker or other appliance generating heat. Installation in such a location could lead to damage to the appliance and the loss of warranty.
•Remove packaging material and any protective film on the surface of the casing.
Note: Do not remove the light grey flimmer cover plate, which is mounted in the cooking area to protect the magnetron.
Description of functions
Setting the clock
After inserting the mains plug into the socket and powering on, open the microwave door once. The LED display reads „0:00“. The oven emits an acoustic signal and goes into standby mode.
Setting 12-hour-mode
1.Press button d „Clock“ once. A red clock symbol appears on the LED display 
and
2.Turn the dial a to set the hours.
3.Now press the button d „Clock“ and the display changes over to the minutes setting.
4.Turn the dial a to set the minutes.
5.To finish press the button d „Clock“. The following display flashes in the LED display „:“ indicating that the „Set clock“ process has been successfully completed.
Setting 24-hour-mode
1.Press button d „Clock“ twice. A red clock symbol appears on the LED display 
and
2.Turn the dial a to set the hours.
3.Now press the button d „Clock“
and the display changes over to the minutes setting.
4.Turn the dial a to set the minutes.
5.To finish press the button d „Clock/energy save“. The following display flashes in the LED display „:“ indicating that the „Set clock“ process has been successfully completed.
Note: If you press the button „Cancel/Stop“ i, the appliance automatically changes back to its previous status.
- 9 -
