Onkyo TX-SR603/603E, TX-SR8360 Setting the Powered Zone, Buttons to select g. Powered

Zone 2—Continued
Setting the Powered Zone 2	3	Use the Up and Down [ ]/[ ]
To use Zone 2, you must make this setting. It enables the		buttons to select “g. Powered
		Zone 2,” and use the Left and
speakers connected to the ZONE 2 SPEAKERS termi-
		ENTER
nals so that they produce sound when Zone 2 is used.		Right [ ]/[ ] buttons to select:

	1
	2	2, 3
				Not Activated: Zone 2 SPEAKERS
		1, 4		terminals deactivated.
				Activated: Zone 2 SPEAKERS termi-
				nals activated.
				When Zone 2 is activated and turned on
				(see page 76), the speakers connected
				to the ZONE 2 SPEAKERS terminals
				output sound, but the speakers con-
				nected to the SURROUND BACK
				SPEAKERS terminals do not (when
				Zone 2 is activated but not used, the
				surround back speakers work as nor-
1		Press the [RECEIVER] button fol-		mal).
	RECEIVER	lowed by the [SETUP] button.	4	Press the [SETUP] button.
		The main menu appears onscreen.		The setup menu closes.

2		Use the Up and Down [ ]/[ ]	Note:
			This procedure can also be performed on the AV receiver
		buttons to select “0. Initial	by using its [SETUP] button, arrow buttons, and
	ENTER	Setup,” and then press [ENTER].	[ENTER] button.

The Initial Setup menu appears.

ENTER

75