Installation
14 Vidikron VL-40 and VL-46 Owner’s Operating Manual
PRELIMINARY
3.2 Quick Setup

Table 3-1 gives a quick overview of the DView installation process. The sections following this

one provide detailed instructions.

Installation should be performed by a qualified custom video installation

specialist.

Table 3-1. Installation Overview

Step Procedure For Details, refer to
page...
1Mount the DView on a wall (optional) 15
2Connect signal sources to the DView 16
3Connect external controller to RS-232 port (optional) 23
4Apply power to the DView 25
5Change the OSD language 25
6If using the DView with a PC, adjust PC display properties 26
7
Display calibration: adjust the following for each input; save
settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position
29 through 41
Note