Operation

ISF Calibration ➤

ISF Calibration

Picture Adjust

White Balance

Blue Enable

Baud Rate

Factory Reset

Splash Duration

Use the ISF Calibration menu to perform advanced picture quality adjustments. This menu

should be used by ISF-certified technicians only.

You must enter a passcode to access the ISF Calibration menu.

Note

Picture Adjust: The controls in this menu are identical to those in the main Picture Adjust menu, but are accessible only by entering the ISF Calibration menu passcode. This makes it possible to restore the picture quality settings to what they were when the DView was installed, simply by recalling the “ISF Night” or “ISF Day” preset.

•Brightness: Refer to Brightness on page 31.

•Contrast: Refer to Contrast on page 32.

•Color: Refer to Color Saturation on page 33.

•Tint: Refer to Tint on page 33.

•Sharpness: Refer to Sharpness on page 34.

•ADC Phase Adj.: This control works similarly to the Phase adjustment for RGB signals (refer to Phase on page 38). Use it to improve the apparent sharpness of 720p and lower-resolution Component, S-Video or Composite sources. For best results, adjust ADC Phase while displaying a “Sharpness” pattern (Figure 4-5).

•DNR: Refer to DNR on page 34.

•MPEG NR: Refer to MPEG NR on page 34.

•Backlight: Refer to Backlight on page 34.

•Color Temp.: Refer to Color Temperature on page 34.

If you are adjusting a “Custom” color temperature, select Custom from the Tip Color Temp. menu and press ENTER. Then, press ENTER a second time to go directly to the White Balance menu. (This shortcut is available only from

the ISF Calibration menu.)

•Gamma: Refer to Gamma on page 35.

•Black Level: This control compensates for incoming elevated black levels present in certain video signals. The default setting (32) results in a minimum black level of approximately 0 IRE. Adjust as needed to match the dynamic range of the source; increase the value if blacks appear elevated (dark gray). If blacks appear “crushed” (too dark), use a lower settting.

42

Vidikron VL-40 and VL-46 Owner’s Operating Manual

Page 51 Page 53
Page 52
Image 52
Runco VL-40, VL-46 manual ISF Calibration, Should be used by ISF-certified technicians only
Page 51 Page 53

VL-40, VL-46 specifications

The Runco VL-46 and VL-40 are two standout models in the realm of high-end video projection systems, designed to elevate the home theater experience to new heights. Both projectors utilize advanced technologies that cater to audiophiles and cinephiles, delivering stunning visual fidelity and an immersive viewing experience.

One of the main features of the Runco VL series is their use of proprietary DarkChip technology. This innovation enhances contrast levels significantly, allowing for deeper blacks and more vibrant colors. The result is a picture quality that immerses viewers in the content, with stunning detail and clarity that ensures films and television shows are displayed as intended by their creators.

Another hallmark of these projectors is their impressive resolution capabilities. Both the VL-46 and VL-40 support high-definition formats, enabling viewers to appreciate every detail from their favorite films, sports, and games. With native resolutions that cater to 1080p content, these projectors also provide excellent upscaling for lower resolutions, making them versatile choices for varied content.

Color accuracy is another critical aspect of the Runco VL series. These projectors employ advanced color processing technology, which ensures that colors are rendered faithfully. With a wide color gamut, viewers will notice the depth and richness of hues that elevate the cinematic experience, whether watching animated features or live-action blockbusters.

Additionally, both projectors are outfitted with a variety of lens options and customizable settings, enabling users to tailor their viewing experience. This level of customization is ideal for home theater enthusiasts who seek to create an optimal viewing environment tailored to their specific space and preferences.

The aesthetic design of the Runco VL-46 and VL-40 aligns with their performance capabilities, featuring sleek bodies that exude sophistication. They can seamlessly integrate into any home theater setup, ensuring that style does not take a backseat to functionality.

Furthermore, these projectors are equipped with comprehensive connectivity options, including HDMI and other inputs, making them compatible with various video sources such as Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users have a myriad of options for enjoying their favorite content.

In conclusion, the Runco VL-46 and VL-40 projectors represent cutting-edge technology and design in home entertainment. With their exceptional image quality, versatile features, and stylish appearance, these projectors are excellent investments for anyone looking to enhance their home viewing experience. When paired with high-quality audio systems, they create a truly cinematic experience that brings the magic of the movies into the comfort of home.
Top Page Image Contents