Pairing with a device featuring Bluetooth wireless technology
•Devices featuring Bluetooth wireless technology need to be paired with each other beforehand.
•Once devices are paired, there is no need for pairing again, except in following cases:
*Pairing information between this unit and the device is deleted.
*This unit is paired with a new device.
1.Connect this unit to your Sherwood compatible receiver or amplifier.
•Then the LED of this unit will blink.
2.Place this unit and the device to be paired together within 1 meter (3 ft).
3.Perform the pairing procedure on the device. (For details, see the operating instructions of
the device.)
Note: Passcode of this unit is fixed at “0000”. Depending on the device, it may be necessary to input the passcode(in this case, “0000”).
4.If the pairing is successful, the LED of this unit will light up.
•If the LED of this unit blinks, repeat the procedure from the step 2.
Troubleshooting
If you run into any problems using this unit, check the following list.
Should any problem persists, consult your dealer.
• Pairing cannot be done
- Bring this unit and the device closer together.
•Wireless connection featuring Bluetooth technology cannot be established.
-Check that the device is turned on and the corresponding function is on.
-Pairing information may be deleted. Try pairing again.
• No sound or distorted sound
-Check that the device supports A2DP (Advanced Audio Distribution Profile).
-If a device that generates electromagnetic radiation such as a wireless LAN, other device featuring Bluetooth wireless technology or a microwave oven is nearby, move away from such sources.
-Remove any obstacle between this unit and the device.
Listening to the music
•You can listen to the music of the device featuring Bluetooth wireless technology on the Sherwood compatible receiver or amplifier to which this unit is connected.
1.Connect this unit to your Sherwood compatible receiver or amplifier.
•Then the LED of this unit will blink.
2.Select the input source on your receiver or amplifier.
3.Start playback on the device.
•If the wireless connection featuring Bluetooth technology between this unit and the device is established, the LED of this unit lights up and the sound is heard.
•Bluetooth wireless technology operates within a range of about 10 meters (33 ft). Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or
electromagnetic environment.
Notes:
•If the wireless connection featuring Bluetooth technology cannot be established with the device paired already, try pairing again.
•We do not take any responsibility for leakage of information during communication.
•Connection with all devices featuring Bluetooth wireless technology cannot be guaranteed.
•Depending on the device, communication may take some time.
Specifications
•Maximum Communication Range : Approximately 10 m ( 33 ft)
•Frequency Band : 2.4000 GHz ~ 2.4835 GHz
•Terminals : 24 pin
•Frequency Response, 100 Hz ~ 15 kHz : ±3 dB
•Signal to Noise Ratio : 85 dB
•RF Level :
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sherwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
Note : Design and specifications are subject to change without notice for improvements.
QD ID : B013892
