Onkyo TX-SR603/603E Displaying Radio Text RT, Listening to Traffic News TP, Notes, the display

Basic Operations—Continued

Displaying Radio Text (RT)

1

When tuned to an RDS station that’s broadcasting RT text information, that information can be displayed.

1		Press the [RT/PTY/TP] button
	RT/PTY/TP	once.

The RT information scrolls across the display.

Notes:

•The message “Waiting” may appear while the AV receiver waits for RT information.

•If the message “No Text Data” appears on the display, no RT information is available.

4 To start the search, press

[ENTER].

ENTER

The AV receiver searches until it finds a station of the type you specified, at which point it stops briefly before con- tinuing with the search.

5	When a station you want to listen
	to is found, press [ENTER].
	If no stations are found, the message

“Not Found” appears.

Listening to Traffic News (TP)

2 1 3

You can search for TP radio stations.

Finding Stations by Type (PTY)

2 1 4, 5 3

You can search for radio stations by type.

1		Use the [TUNER] input selector
	TUNER	button to select FM.
2		Press the [RT/PTY/TP] button
	RT/PTY/TP	twice.
		The current program type appears on
		the display.
3	PRESET	Use the PRESET [ ]/[ ] but-
		tons to select the type of pro-

gram you want.

See the table on page 58.

1		Use the [TUNER] input selector
	TUNER	button to select FM.
2		Press the [RT/PTY/TP] button
	RT/PTY/TP	three times.

If the current radio station is broadcast- ing TP (Traffic Program), “[TP]” will appear on the display, and traffic news will be heard as and when it’s broad- cast. If “TP” without square brackets appears, this means that the station is not broadcasting TP.

3	To locate a station that is broad-
ENTER	casting TP, press [ENTER].

The AV receiver searches until it finds a station that’s broadcasting TP.

If no stations are found, the message “Not Found” appears.

59