Onkyo TX-SR603/603E, TX-SR8360 instruction manual First Time Setup, Automatic Speaker Setup

First Time Setup

This chapter explains the settings that you need to make before using the AV receiver.

Automatic Speaker Setup	2	Put the speaker setup micro-
With the supplied speaker setup microphone, the Auto-		phone in the listening position,
		and connect it to the SETUP MIC
matic Speaker Setup function can measure the test tone
		jack.
output by each speaker and automatically determine the
number of speakers connected, their sizes, the distance
from each speaker to the listening position, and so on.
Before using this function, connect and position all your		MIC
speakers.		position

1		2
	3–7		Notes:
			•	Make sure the microphone is hori-
				zontal.
			• If there’s an obstacle between the
				microphone and any speaker, the
				automatic setup will not work cor-
				rectly. Setup the room as you would
				when enjoying a DVD.
1		Turn on the AV receiver and the	• If the AV receiver was previously
				muted, the Muting function will be
		connected TV.
				cancelled.
		On the TV, select the input to which the
			•	The automatic setup cannot be used
		AV receiver is connected.
				while a pair of headphones is con-
				nected.
			• By putting the microphone close to
				where your ears would normally be
				at the listening position, a more accu-
				rate setup can be achieved. If you use
				a tripod or level table, you can adjust
				the height of the microphone.

39