FARGO electronic HDP5000 manual Using the Encoding Mode dropdown list, Category Description

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Encoding Mode dropdown list

Use the Encoding Mode option to specify which magnetic encoding standard to use.

Category	Description
Installation	The HDP Card Printer can be installed with one of two types of
	factory-installed Magnetic Stripe Encoding Modules.
Magnetic Encoding	Change the encoding mode and coercivity setting or modify the ISO
options (changing	standards for tracks 1, 2 and 3, by correctly modifying these
and modifying)	Magnetic Encoding options.
ISO Encoding	If you select ISO Encoding, you send down a formatted set of
selection (active and	characters. (Note: This selection activates the track tabs. However,
inactive functions)	all functions on the Track tabs are inactive/gray and display ISO
	defaults, which are the defaults listed for each track below. The
	Shift Data Left check box remains unchecked and inactive.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-60