FARGO electronic HDP5000 manual Accessing the Clean Printer tab

RESTRICTED USE ONLY Fargo Electronics, Inc.

Accessing the Clean Printer tab

Cleaning the Printer Platen Roller and Card Feed Rollers

Perform this procedure approximately every 1,000 prints to maintain a consistent print quality. (Note: The Card Feed Rollers move the card throughout the print process. Rollers should be kept clean to prevent card jams and card contamination. This cleaning process will ultimately lead to better print quality and extended Printhead life.)

Step Procedure

1From the HDP5000 Driver, click on the Toolbox button to bring up the Clean Printer tab.

2Follow the instructions from the CLEAN PRINTER tab on the Driver. See Display A below.

(Note: If your Printer is equipped with a Magnetic Encoder, you must insert the Cleaning Card with the printed side up and with a small Liner Strip towards the front of the Printer. See Display B below)

3Replace the printing supplies and close the Print Stations after the Rollers are clean and completely dry.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-3