FARGO electronic Check Lam Power and Reboot Required: Troubleshooting Guide

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
Lam Card Jam	A jam occurred somewhere	Open covers and clear the
(PC Error Message	between the Printer and the	obstruction/jam.
	Laminator.
No. 53, 212, 214, and
215)
Lam Check Card	A jam occurred inside the	Open Lam cover and clear the
(PC Error Message	Laminator.	obstruction.
No. 213)
Lam Com Error	There was a communication	Check Lam power/connections
(PC Error Message	failure between the Printer	and restart the Printer.
	and Laminator.
No. 246)
Lam Error	A generic unknown error as	Reset the Printer and try
(PC Error Message	occurred.	again. If this problem persists,
		call for technical assistance.
Nos. 237 and 238)52
Lam Card Not	The card is not ejected from	The Lamination material is
Ejected	the Laminator.	stuck to the card.
(PC Error Message
No. 216)
Lam Handler Startup	A problem was detected	Reset the Printer and try
Error	during Printer start-up.	again.
(PC Error Message		If this problem persists, call for
No. 66)		technical assistance.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-12