FARGO electronic Fargo HDP5000 Troubleshooting: Error Codes, Lamination Issues, and Printing Problems

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
Laminate 1 Jam	A Jam occurred with the	Open Lam cover and clear the
(PC Error Message	Laminator material in	obstruction
	Cartridge 1.
No. 229)
Laminate 1 Low	The material is getting low in	Make sure more is on hand for
(PC Error Message	Lamination Cartridge 1.	when it runs out.
Nos. 239)
Laminate 1 Out	The Laminate in Cartridge 1	Replace it with a new roll of
(PC Error Message	has run out.	material.
No. 208)
Laminate 2 Bad	The Lamination material in	Install valid material.
(PC Error Message	Cartridge 2 is not valid for
	this Laminator.
No. 260 and 262)
Laminate 2 Jam	A Jam occurred with the	Open Lam cover and clear the
(PC Error Message	Laminator material in	obstruction.
	Cartridge 2.
No. 230)
Laminate 2 Low	The material is getting low in	Make sure more is on hand for
(PC Error Message	Lamination Cartridge 2.	when it runs out.
No. 240)
Laminate 2 Out	The Laminate in Cartridge 2	Replace it with a new roll of
(PC Error Message	has run out.	material.
No. 209)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-14