FARGO electronic HDP5000 manual Selecting the Card Size

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Card Size

Step Procedure

1Select the appropriate card option:

•CR-80:This selection is the default form size for the HDP5000. This will print a 2.125 X 3.374 image including a .04 over-bleed on each of the 4 sides making the overall form size 2.204 X 3.452 (56 X 87.7 mm).

•Custom: This selection is used to create a custom form size from 1.0 x 3.0 to 2.204 to 3.452 (25.4 X 76.2 mm to 56 X 87.7 mm).

The dimensions of the total print area for each card size will appear in the Print Width and Print Length boxes.

•These print area dimensions are .04" (1mm) larger than the actual card size. This is so the Printer can overprint images to ensure they will appear Edge-to-Edge when transferred to the card.

•For this reason, when designing a card format, always set the card size or page size within the card design program to the exact Print Length and Width dimensions listed in the Printer Driver.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-12