Singer 67B manual How to thread the Needle

Junior Miss 67B

How to thread the Needle

The numbers on your machine show you each step you must follow.

1.Turn hand wheel until needle is as high as it will go.

2.Lower the presser foot. Put a spool of thread on the spool pin.

3.Follow the arrows and thread each step as shown. (At point 2, make sure you place the thread between the two tension discs.)

4.Thread the needle from front to back. Pull out a loop of thread between the tension dial and take-up lever and draw about 3 inches of thread through eye of needle.

Table of Contents Previous Page Next Page

10