Junior Miss 67B
Table of Contents Previous Page | Next Page
7
1. Attach hand crank to hand wheel and turn
crank in direction of arrow, until needle is
up as far as it will go.
3. Hold bobbin case with open end downward
and bobbin will drop out.
4. Place a spool of thread on spool pin. Pull
thread through thread guide number 1.
Bring about two inches of thread through
hole in rim of bobbin from the inside out.
5. Gently press bobbin winder spring and
place bobbin on bobbin winder, with
threaded end facing you.
2. Open slide plate and lift bobbin case out of
holder.
How to wind the Bobbin