Junior Miss 67B
The Machine Cover
The machine cover protects your machine from dirt and dust when you are not sewing. Replace the cover when you finish sewing.
How to remove machine cover
1.Put your right hand on the handle and your left hand under the left
2.Pull the left tab away from the case and lift the cover up and off the machine.
How to replace machine cover
1.Remove the hand crank.
2.Carefully put the cover over the machine with the SINGER label in front.
3.Push down a little until the tabs snap in place.
The Table Clamp
The table clamp helps to hold the machine in place. Always remember to fasten the table clamp before you start to sew.
How to fasten machine to table
1.Pull down the table clamp from underneath the machine.
2.Hold clamp down and slide machine onto top of table.
3.Let the clamp hook under the edge of the table.
Table of Contents | Previous Page Next Page |
3
