Junior Miss 67B
Table of Contents Previous Page | Next Page
8
6. Hold thread end. Turn hand crank in direc-
tion of arrows to wind thread onto bobbin.
Wind only a few coils of thread.
8. Continue winding bobbin with hand crank
or with power switch turned to ON. Guide
thread with your fingers so that it winds
evenly.
7. Cut off the extra thread hanging from hole
in bobbin rim. Be sure you remove the
hand crank if you turn on the power switch.
9. When bobbin is full, cut the thread about 2
or 3 inches away from the bobbin. Then
remove bobbin.